current location:front page > news center > faq>text
popular tags:how to clean the oil fume purifier,how to install the oil fume purifier,brand recommendation of oil fume purifier8000m³/h · zhiyun oil fume purifier
weiton was established in 2019 and was approved by the environmental protection bureau, industrial and commercial bureau, and qichacha.
regularity is guaranteed. confidential information, standard oil fume purification >receive a 30-day free offer
the installation of barbecue fume purifier circuit mainly involves two parts: electric field wiring and power wiring. the following are the specific installation steps and precautions:
1. electric field wiring:
* the electric field wiring of the oil fume purifier is divided into red and white. the red wiring should be connected to the high voltage zone and the white should be connected to the low voltage zone.
* if you find that there are yellow connection lines on the electric field, this is the connected ground line, which can prevent leakage.
2. power wiring:
* when connecting the power supply of the fume purifier, the staff must connect the high-voltage thin wires of the switching power supply to their respective electrostatic fields, and at the same time connect 220 V ac current.
* adjust the high-voltage output potentiometer to allow the power supply to output the appropriate voltage. after installation, turn on the "start" button to see if it works normally.
during the installation process, the following things need to be paid attention to:
* before installing the purifier, if the smoke exhaust pipe has been installed, the direction of the fume purifier cannot be changed. at this time, it is necessary to change the air inlet and outlet of the fume purifier.
* please turn off the air main switch during installation and completely cut off the power to ensure safety during installation.
* the electric field wiring and power wiring of the oil fume purifier need to be carried out in the correct way to avoid errors or reverse connections, otherwise it may affect the normal operation of the purifier.
please note that the above steps and precautions are for reference only. the specific installation process may vary depending on the model of the fume purifier and the actual situation. therefore, it is best to read the product manual carefully before installation and follow the steps on the manual to install. if you are not sure how to install it, it is recommended to contact a professional to install it.
the oil fume purifier is mainly used in commercial kitchens, which can purify the oil fume exhaust gas into clean air. the installation order of the oil fume purifier is as follows: stove-smoke collection hood-ventilation duct-fume purifier-ventilation duct-fan. the ventilation ducts at both ends of the fume purifier need to be kept at a length of more than 2 meters to have a good purification effect.
installation and maintenance: the variable diameter air duct adjacent to the air inlet and outlet of the equipment should be as smooth as possible to ensure the infection effectiveness of the equipment. a straight pipe with a length of more than 4 times larger than the diameter of the pipe must be assembled and connected by smooth pipes.
to ensure the infection result, the air volume of the individual fan is not greater than the intended air volume of the equipment. the equipment must work under the intended air volume. the user can use the inverter to control the fan or install a air regulating valve device at the fan outlet.
for oil fume purification, the oil fume purification treatment technology methods on the market include mechanical separation method, catalyst combustion method, activated carbon adsorption method, fabric filtration method, wet treatment method and electrostatic treatment method.
the mechanical separation method uses the principle of inertial collision or cyclone separation to separate the oil smoke.
disadvantages: the baffle filter is prone to cracking and is directly discharged from waste; it requires regular maintenance and maintenance; the vertical angle of installation should be less than 15 °;the purification efficiency is not high and is only suitable for pretreatment or purification efficiency requirements.
steps to install the oil fume purifier:
the correct installation is: smoke collecting hood - pipes over 2 meters - oil fume purifier - pipes over 2 meters - fan - direct air emissions. it is prohibited to be replaced and installed by fans and fume purifiers, which will cause the purification effect of the fume purifier to be halved. please install the fume purifier according to the national standard installation method to achieve a better purification effect.
how to correctly connect the power supply to the fume purifier? oil fume purifiers are devices that rely on power devices to provide energy. therefore, correct power connection can not only improve the working efficiency of the equipment, but also extend its service life and bring good benefits to the company. today, the editor has compiled relevant knowledge on the correct power connection method of the oil fume purifier for you, let’s go into the article to explore and discover. the power supply of the oil fume purifier should be installed in the control box outside the electric field. the bottom of the power supply needs to be maintained at a certain distance from the control box, so it can be used. Z the stent is high, which facilitates ventilation and avoids the power loss caused by the power supply heating power caused by the high voltage magnetic short circuit. stay away from heat sources and high temperature objects and avoid direct sunlight. if the installation environment inevitably requires contact with the heat source, the fan cooling device should be installed in the control box as appropriate. when turning on the power supply of the equipment, the fan needs to start at the same time or before it is started.
the high-voltage end of the oil fume purifier power supply output should be firm, reliable and insulated to the load (electric field). it is prohibited to turn on the power supply without the load (electric field) to avoid surrounding conductivity, dust, corrosion of metals and gases that damage the insulating material. invade. the power supply high voltage line should be kept at least 3 CM distance. the insulation resistance of the electric field requires >100MΩ,the power supply can only be connected at high voltage. equipment control requires complete system protection to ensure the normal operation of the equipment. power supply installation is not suitable for using leakage switches. the power supply and electric field need to have a firm and reliable grounding. during use, it should be inspected, maintained and cleaned regularly. the oil fume purifier has high requirements for the surrounding environment, voltage and resistance of the power supply. in order to avoid the occurrence of danger, it is necessary to strictly install it in accordance with the requirements.
visually smoke-free·through environmental protection·direct sales by manufacturers
professional, safe and reliable, solving kitchen fume problemslabel:
previous article:is the hot pot table fume purifier effective?
next article:how to install oil fume purifier and fan
most likes
popular articles
latest articles
popular tags